Each
£233.49 £274.95 approx 15% off
Please select one of the buttons below.
Prodigy Express Starter Package (DCC01)
< Click here for more details >
< Click here for less details >
For a newcomer to DCC or for the operation of a smaller layout, this system is a great choice. Comprising of a Base Station, Walkaround, and Power Supply, this system is packed with features but is above all, incredibly easy to use and allows you to run your railway without fuss. With 1.6 amps, there is enough power to keep things interesting but its best feature is its sheer ease of use. Some other budget systems have the control on the console, but with this system the lightweight and comfortable Walkaround allows you extra mobility.
You can add an additional handset to your system (DCC14) to unlock extra functions and point control.
If you wish to extend your EXPRESS system, this is easily achievable by adding a Prodigy ADVANCE Walkaround as is Wireless capability by using the DCC51 Wireless conversion set.
Not as powerful as its older brother Prodigy ADVANCE and without the ability to operate accessories in its current format, this system might not suit the more experienced modeller, but for the newcomer or someone keen to try DCC at a competitive price, this should be a system worth consideration.
Stuck where to put your DCC Controller? you can now attach it to your layout using the DCC66 Prodigy Controller Caddy. This unit has been designed to screw directly to your baseboard and will fit most DCC Controllers and even mobile phones.
Pre order this item today with just a 10% deposit saving 15% on RRP No arrival date is know as yet To pre order this item please click the pre order button above
Quantity Each
£395.49 £465.00 approx 15% off
Please select one of the buttons below.
< Click here for more details >
< Click here for less details >
PRODIGY ADVANCE2 consists of three elements. The POWER PACK transforms the power from your mains socket ready for the Base Unit. The BASE UNIT is the brains behind the operation. It contains all the technology you need to send DCC commands to your trains and accessories. However, short of turning the power on and off, you'll find your closest companion is the Walkaround controller which plugs straight into the Base Unit.
The WALKAROUND is a hand-held controller that you use to send your commands to the Base Unit, which then sends them on to the relevant decoder on your layout. You control the speed and direction of your trains from here. One of the key features of DCC operation is that each of your locomotives has a numeric address which you select as and when you want to run that locomotive.
DCC allows you to run it anywhere on your railway at the same time as other trains are moving as well. You can operate points (individually or route set) and signals from the Walkaround. You can use it to programme your decoders to replicate the running characteristics of your locomotives, or even introduce a speed clock that allows you to run a 24-hour timetable within one operating session.
The possibilities are almost endless with DCC and with locomotives becoming available with factory fitted decoders as standard, we are entering an exciting new era. Of course, you can also retrofit your older locomotives with decoders if you wish.
The handset in this pack is fitted with a clear and bright blue backlit display, ideal for users operating a railway in less than ideal lighting conditions.
Stuck where to put your DCC Controller?
You can now attach it to your layout using the DCC66 Prodigy Controller Caddy. This unit has been designed to screw directly to your baseboard and will fit most DCC Controllers and even mobile phones.
Each
£475.99 £594.95 approx 20% off
Please select one of the buttons below.
Prodigy Advance2 Wireless Starter Package V2 (DCC04)
< Click here for more details >
< Click here for less details >
The Prodigy Wireless Starter Pack is in effect the DCC02 Prodigy Advance base unit utilizing the Wireless technology to allow greater freedom when controlling your layout. The wireless dongle receiver included gives a range of around 100ft, and the Prodigy base unit can accomodate additional Wireless Walkarounds, and has controller ports for Wired Walkarounds.
DCC allows you to run many different locomotives and accessories at the same time from one controller. The Prodigy Wireless Walkaround supports 28 locomotive decoder functions, so is ideal for locomotives with sound and lights. You can operate points (individually or route set) and signals from the Walkaround, and can use it to programme your decoders to replicate the running characteristics of your locomotives, or even introduce a speed clock that allows you to run a 24 hour timetable within one operating session.
The possibilities are almost endless with DCC and many locomotives are becoming available with factory-fitted decoders as standard
Of course, you can also retro-fit your older locomotives with decoders if you wish.
Stuck where to put your DCC Controller? you can now attach it to your layout using the DCC66 Prodigy Controller Caddy. This unit has been designed to screw directly to your baseboard and will fit most DCC Controllers and even mobile phones.
Contains
Prodigy Advance Base Unit
Prodigy Wireless Walkaround Handset
Wireless Dongle Receiver
Handset Charging Cable
Four Pin Terminal Box
UK Power Lead/Transformer
Pre order this item today with just a 10% deposit saving 20% on RRP No arrival date is know as yet To pre order this item please click the pre order button above
Quantity Each
£105.99 £124.95 approx 15% off
Please select one of the buttons below.
< Click here for more details >
< Click here for less details >
The DCC05 Prodigy WiFi receiver gives Android and iOS users the option to operate their Prodigy system with a smartphone or tablet. This means you have greater flexibility to control your layout, both alone and with multiple controllers.
To install, simply connect the Prodigy WiFi into the controller or cab socket on your Prodigy base unit - you can do this with the lead provided, or with any Prodigy handset cable.
Once you have installed the Prodigy WiFi, open your device's WiFi settings and connect it to the relevant network.
The Prodigy WiFi is compatible with the JMRI Engine Driver (Android) and WiThrottle (iOS) apps. Versions of both apps are free to download, so you can download the relevant app before-hand to take a look at how it works.
The Apps are for operating the layout and accessories but do not allow reading or programming, so keep your original handset safe. You can also use your handset and WiFi devices together, simply remember to set the Cab number higher than your last handset number.
Information and support on each of the apps can be found on the app itself, or on their websites.
Quantity Each
£21.45
Please select one of the buttons below.
Classic Solenoid Point Motor - DCC Fitted (GMC-PM10D)
< Click here for more details >
< Click here for less details >
he very versatile PM10D Digital Solenoid
The PM10D point motor has been created to make installation and wiring as easy as possible for all modellers in all scales.
Based on the very efficient "Universal fit" PM10, the PM10D also incorporates a DCC-Digital decoder that makes wiring very simple.
However, DC modellers have not been forgotten - At Gaugemaster we understand that while ALL modellers want easy wiring, many who still prefer to drive their trains with DC need simple wiring too, so the PM10D has also been designed to be 100% DC compatible!
How simple is PM10D? How about fewer wires and less soldering!
Installation can be either directly to your pointwork via the sleeper tabs OR "under-board" using the in-built fixing points. We even supply you with screws and a drive-pin extension!
Basic wiring of power to your PM10D for point operation is super-easy and needs only TWO wires, not three as is usual.
PM10D has built-in connections for added "Control Panel Switches" as well as LEDs on your mimic panel for position indicators, and all terminals are "Screw connections".
Power is stored in the built-in CDU, so power wiring can be lighter (We recommend GM09RB or similar) - and LED and panel switches carry almost NO current at all, so they can bewired with GM11 (Available in various colours).
Of course, PM10D users also benefit from Gaugemaster’s well regarded customer service for back-up, support and advice.
Quantity Each
£90.99 £107.25 approx 15% off
Please select one of the buttons below.
Classic Solenoid Point Motor - DCC Fitted - Pack Of 5 (GMC-PM10D)
< Click here for more details >
< Click here for less details >
The very versatile PM10D Digital Solenoid
The PM10D point motor has been created to make installation and wiring as easy as possible for all modellers in all scales.
Based on the very efficient "Universal fit" PM10, the PM10D also incorporates a DCC-Digital decoder that makes wiring very simple.
However, DC modellers have not been forgotten - At Gaugemaster we understand that while ALL modellers want easy wiring, many who still prefer to drive their trains with DC need simple wiring too, so the PM10D has also been designed to be 100% DC compatible!
How simple is PM10D? How about fewer wires and less soldering!
Installation can be either directly to your pointwork via the sleeper tabs OR "under-board" using the in-built fixing points. We even supply you with screws and a drive-pin extension!
Basic wiring of power to your PM10D for point operation is super-easy and needs only TWO wires, not three as is usual.
PM10D has built-in connections for added "Control Panel Switches" as well as LEDs on your mimic panel for position indicators, and all terminals are "Screw connections".
Power is stored in the built-in CDU, so power wiring can be lighter (We recommend GM09RB or similar) - and LED and panel switches carry almost NO current at all, so they can bewired with GM11 (Available in various colours).
Of course, PM10D users also benefit from Gaugemaster’s well regarded customer service for back-up, support and advice.
Quantity Each
£44.99 £49.95 approx 10% off
Please select one of the buttons below.
Each
£203.99 £239.95 approx 15% off
Please select one of the buttons below.
Prodigy Advance2 Wireless Walkaround (DCC13)
< Click here for more details >
< Click here for less details >
Additional controller for the DCC03 Wireless Starter Package. This unit comes complete with Wireless handset, batteries and charging cable which plugs straight into the base unit. Approximate range for this unit is 50ft from the base unit.
Stuck where to put your DCC Controller? you can now attach it to your layout using the DCC66 Prodigy Controller Caddy. This unit has been designed to screw directly to your baseboard and will fit most DCC Controllers and even mobile phones.
Pre order this item today with just a 10% deposit saving 15% on RRP No arrival date is know as yet To pre order this item please click the pre order button above
Each
£156.99 £184.95 approx 15% off
Please select one of the buttons below.
Walkaround Controller For DCC02 Advance2 Backlit (DCC14)
< Click here for more details >
< Click here for less details >
Additional controller for the DCC02 Prodigy Starter Package. This unit comes complete with Back-lit handset and cable which plugs straight into the base unit. This unit features a clear and bright blue backlit display, ideal for users operating a railway in less than ideal lighting conditions.
Stuck where to put your DCC Controller? you can now attach it to your layout using the DCC66 Prodigy Controller Caddy. This unit has been designed to screw directly to your baseboard and will fit most DCC Controllers and even mobile phones.
Pre order this item today with just a 10% deposit saving 15% on RRP No arrival date is know as yet To pre order this item please click the pre order button above
Quantity Each
£23.75
Please select one of the buttons below.
OMNI Decoder - Next18 Decoder (DCC18)
Quantity Each
£42.99 £47.50 approx 10% off
Please select one of the buttons below.
OMNI Decoder - Next18 Decoder - Pack Of 2 (DCC18)
Quantity Each
£88.99 £104.95 approx 15% off
Please select one of the buttons below.
OMNI Decoder - Next18 Decoder - Pack Of 5 DCC18 (BPDCC18)
Quantity Each
£29.95
Please select one of the buttons below.
Surface Mounted Point Motor - DCC Fitted (GMC-PM20D)
< Click here for more details >
< Click here for less details >
Digital Surface Mounted Point Motor. This pack contains a PM20 Point Motor, a DCC Single Output Accessory Decoder, a 3 Core Link Wire, 3 Accessory Decoder Screws and 5 Point Motor Screws. There are also full instructions on installation, wiring and addressing. The back of the Accessory decoder is fitted with a self adhisive pad so it can be stuck on a board during installation.
Measurements:
Length: 68mm
Width: 22mm
Depth: 9mm
Length: 37mm
Width: 38mm
Depth: 20mm
£39.95
Please select one of the buttons below.
Accessory Decoder (DCC30) Believed to be last one available to order.
Quantity Each
£42.49 £49.95 approx 15% off
Please select one of the buttons below.
Auto Reverse Module (DCC40)
Each
£212.49 £249.95 approx 15% off
Please select one of the buttons below.
Prodigy DCC Booster Unit 8 Amp (DCC49)
< Click here for more details >
< Click here for less details >
Allows you to separate your layout into different power districts meaning you can run even more locomotives on your digitally controlled layout, as well as being an upgrade that allows you 8 amps of power.
This should be plenty of power for large domestic and even club layouts. This unit comes complete with DCC booster, 8 amp transformer, mains cable and controller cable.
Pre order this item today with just a 10% deposit saving 15% on RRP No arrival date is know as yet To pre order this item please click the pre order button above
Each
£267.49 £314.95 approx 15% off
Please select one of the buttons below.
Prodigy Wireless Conversion Set (DCC51)
< Click here for more details >
< Click here for less details >
Use this conversion set to upgrade your ADVANCE or EXPRESS to wireless operation. This unit comes complete with a Wireless handset, Batteries, a Wired Receiver which plugs into the Base Unit and a Charging Cable. You can still use your old handset as a "Slave" unit but you will be tethered to the layout.
With the wireless handset, you will be free to roam around the layout and still have control over all the locomotives and accessories, the approx range on this unit is 50ft away from the base unit.
Stuck where to put your DCC Controller? you can now attach it to your layout using the DCC66 Prodigy Controller Caddy. This unit has been designed to screw directly to your baseboard and will fit most DCC Controllers and even mobile phones.
Pre order this item today with just a 10% deposit saving 15% on RRP No arrival date is know as yet To pre order this item please click the pre order button above
Each
£62.99 £69.99 approx 10% off
Please select one of the buttons below.
Prodigy USB PC Interface (DCC55)
Pre order this item today with just a 10% deposit saving 10% on RRP No arrival date is know as yet To pre order this item please click the pre order button above
Quantity Each
£4.95
Please select one of the buttons below.
Spare Plug for DCC01 or DCC02 (DCC60)
Quantity Each
£1.99
Please select one of the buttons below.
1 x Medium NEM Socket (DCC61)
Quantity Each
£9.49 £10.50 approx 10% off
Please select one of the buttons below.
5 x Medium NEM Sockets (DCC61)
Quantity Each
£7.25
Please select one of the buttons below.
Prodigy Universal Lead "2m" (DCC62)
Quantity Each
£1.99
Please select one of the buttons below.
Prodigy Style Universal Lead "Yellow" 7 Foot Long - Like DCC62
Quantity Each
£2.49
Please select one of the buttons below.
Prodigy Style Universal Lead "Yellow" 10 Foot Long - Like DCC62
Quantity Each
£2.49
Please select one of the buttons below.
Prodigy Style Universal Lead "Green" 10 Foot Long - Like DCC62
Quantity Each
£2.99
Please select one of the buttons below.
Prodigy Style Universal Lead "Yellow" 14 Foot Long - Like DCC62
Quantity Each
£2.99
Please select one of the buttons below.
Prodigy Style Universal Lead "Green" 14 Foot Long - Like DCC62
Quantity Each
£2.99
Please select one of the buttons below.
Prodigy Style Universal Lead "Red" 14 Foot Long - Like DCC62
Quantity Each
£2.99
Please select one of the buttons below.
Prodigy Style Universal Lead "Blue" 14 Foot Long - Like DCC62
Quantity Each
£23.99 £27.95 approx 15% off
Please select one of the buttons below.
Prodigy Advance Power Supply Unit (DCC63)
< Click here for more details >
< Click here for less details >
SMPS switch mode power supply for use on our DCC01/02/03 and Tech6 as well as a variety of other manufacturers products where a SMPS is required.
Specifications:
Input: Requires 240v AC~ C7 type figure of 8 mains lead (not supplied) Use DCC64
Output: 15v DC 3.5A via 2.1mm connector
Quantity Each
£6.99 £8.50 approx 20% off
Please select one of the buttons below.
Prodigy Power Pack Lead (DCC64)
Quantity Each
£23.99 £27.95 approx 15% off
Please select one of the buttons below.
Prodigy Express Power Supply Unit (DCC65)
Quantity Each
£11.49 £12.50 approx 10% off
Please select one of the buttons below.
Prodigy DC Adaptor Plate (DCC71)
< Click here for more details >
< Click here for less details >
This is an incredibly useful product that offers the modeller a decoder testing facility in a non railway environment which can be vital before a complex installation. The bulb (included) acts as the motor in such a test. It also offers outputs to run a locomotive on DC as well as the facility to switch instantly between the Program and Main Tracks.
Each
£11.49 £12.50 approx 10% off
Please select one of the buttons below.
Prodigy Walkaround Adaptor (DCC77)
Pre order this item today with just a 10% deposit saving 10% on RRP No arrival date is know as yet To pre order this item please click the pre order button above
Quantity Each
£7.49 £8.50 approx 10% off
Please select one of the buttons below.
DCC Autofrog For Electro Frog Points (DCC80)
< Click here for more details >
< Click here for less details >
The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog points is recommended on digital layouts to ensure reliability but this can make extra switching more complicated than it needs to be. Allow us to introduce you to the Autofrog. Wiring the DCC80 is simple. There are three solder connections on the board, 2 connections labelled “R” - which you should connect to your rails or your bus and 1 connection labelled “F” which you connect to the frog input wire.
As there are so many variations of point/turnout, we recommend you follow your track manufacturer’s instructions. For an example, in the instructions below have shown a typical set up where the frog is isolated by an optional track break – this avoids unwanted short circuits if you forget to throw the point. With the frog powered by the DCC80, it can detect the incoming polarity of the wheels and switches the frog to match.
GUARANTEE: We undertake to replace or repair, at our discretion, free of charge, any unit found defective by manufacture providing the item has not been tampered with. This guarantee covers only the supply of replacement, replacement parts, labour cost for fitting of same and the cost of returning the unit to the customer or retailer. This Guarantee does not affect your Statutory Rights. We reserve the right to vary design or specification without notice.
Specifications:
DCC Track Voltage: 12-20v
Frog Current: 2 Amp max
DCC80 Typical Current Consumption: 20mA
Quantity Each
£18.99 £22.50 approx 15% off
Please select one of the buttons below.
DCC Autofrog For Electro Frog Points - Pack Of 3 (BPDCC80)
< Click here for more details >
< Click here for less details >
The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog points is recommended on digital layouts to ensure reliability but this can make extra switching more complicated than it needs to be. Allow us to introduce you to the Autofrog. Wiring the DCC80 is simple. There are three solder connections on the board, 2 connections labelled “R” - which you should connect to your rails or your bus and 1 connection labelled “F” which you connect to the frog input wire.
As there are so many variations of point/turnout, we recommend you follow your track manufacturer’s instructions. For an example, in the instructions below have shown a typical set up where the frog is isolated by an optional track break – this avoids unwanted short circuits if you forget to throw the point. With the frog powered by the DCC80, it can detect the incoming polarity of the wheels and switches the frog to match.
GUARANTEE: We undertake to replace or repair, at our discretion, free of charge, any unit found defective by manufacture providing the item has not been tampered with. This guarantee covers only the supply of replacement, replacement parts, labour cost for fitting of same and the cost of returning the unit to the customer or retailer. This Guarantee does not affect your Statutory Rights. We reserve the right to vary design or specification without notice.
Pack of 3.
Specifications:
DCC Track Voltage: 12-20v
Frog Current: 2 Amp max
DCC80 Typical Current Consumption: 20mA
Quantity Each
£24.50
Please select one of the buttons below.
Ruby Series 2 Function DCC Decoder (DCC90)
< Click here for more details >
< Click here for less details >
Details
The DCC90 is a large 8 pin decoder which is fitted with a removable 25mm harness including 2 function wires. Fitted in the decoder is a small 2 pin socket which can have the Powerpal inserted into it (sold seperately), This helps keep the locomotive moving in dirty or dead track sections.
Features
2 Digit and 4 Digit Addressing
14, 28 or 128 Speed Steps
Smooth Operation
Constant Brightness Lighting
Direct Mode Programming
Motor Isolation Protection
Advanced Consisting
Socket to Add PowerPal
Quantity Each
£62.49 £73.50 approx 15% off
Please select one of the buttons below.
Ruby Series 2 Function DCC Decoder - Pack Of 3 (DCC90)
< Click here for more details >
< Click here for less details >
Details
The DCC90 is a large 8 pin decoder which is fitted with a removable 25mm harness including 2 function wires. Fitted in the decoder is a small 2 pin socket which can have the PowerPal inserted into it (sold seperately), This helps keep the locomotive moving in dirty or dead track sections.
Features
2 Digit and 4 Digit Addressing
14, 28 or 128 Speed Steps
Smooth Operation
Constant Brightness Lighting
Direct Mode Programming
Motor Isolation Protection
Advanced Consisting
Socket to Add PowerPal
Quantity Each
£24.99
Please select one of the buttons below.
Ruby Series 2 Function Small DCC Decoder (DCC92)
Quantity Each
£63.49 £74.97 approx 15% off
Please select one of the buttons below.
Ruby Series 2 Function Small DCC Decoder - Pack Of 3 (DCC92)
Quantity Each
£36.50
Please select one of the buttons below.
Ruby Series 6 Function Pro DCC Decoder (DCC94)
Quantity Each
£92.99 £109.50 approx 15% off
Please select one of the buttons below.
Ruby Series 6 Function Pro DCC Decoder - Pack Of 3 (DCC94)
Quantity Each
£36.50
Please select one of the buttons below.
Ruby Series 6 Function Pro DCC Decoder (DCC95)
Quantity Each
£92.99 £109.50 approx 15% off
Please select one of the buttons below.
Ruby Series 6 Function Pro DCC Decoder - Pack Of 3 (DCC95)
Quantity Each
£0.01
Please select one of the buttons below.
Gaugemaster - DCC Control (GM9952)