Quantity Each
£3.75
Please select one of the buttons below.
Nylon Screws For Hornby Ringfield DCC Conversions - Pack Of 10 (PS13)
< Click here for more details >
< Click here for less details >
Peters Spares PS13 Nylon Screws For Hornby Ringfield DCC Conversions Pack Of 10
Are you trying to convert Hornby ringfield tender drive units to DCC? If you are and you come across the latter models where the screw connects all the way into the block look no further we have found some nylon screws to replace the metal Hornby one. (Please note they can be screwed into the block & taken out when needed but please take care not to over tighten & snap the screw, they are not the same thread they are just right to force in & nip up tight to fix the carbon brush holder, they will
flex as they are nylon when screwing them in) we have used these on loads of Hornby Conversions and can now offer them for sale.
(Motor is showing an example of where the screws can be used, in this sale you are purchasing the screws only. They are not suitable for Silver Seal Brass face plated models.)
Quantity Each
£2.99
Please select one of the buttons below.
Wheel Contact Spring S6114 (PS14)
< Click here for more details >
< Click here for less details >
Peters Spares PS14 Triang Hornby S6114 0-4-0 Pickup Spring - Replacement (Also on service sheets as S6614)
Fits: 0-4-0 Like: Nellie, Polly R252 R355 R359 R559 R52 Steeple Cab and some others.
Push it on give & make sure the ends rub on the wheels and away your loco will go!
OO Gauge
Quantity Each
£2.99
Please select one of the buttons below.
Wheel Contact Spring S3368 (PS15)
< Click here for more details >
< Click here for less details >
Peters Spares PS15 Triang Hornby S3368 Early Motor Bogie Pickup Spring - Replacement
OO Gauge
Fits:
R157 DMU
R253 Dock Shunter
R555 Midland Pullman
R159 Transcontinental Double Ended Diesel
R55 Transcontinental Single Ended Diesel
R155 Transcontinental Switcher Diesel
R308 Transcontinental NSW Switcher Diesel
Push it on & make sure the ends rub on the wheels and away your loco will go!
Quantity Each
£2.99
Please select one of the buttons below.
Wheel Contact Spring X520 X598 (PS16)
< Click here for more details >
< Click here for less details >
Peters Spares PS16 Triang Hornby X598 Pickup Spring - Replacement
OO Gauge
Fits:
R759 Hall 4-6-0
R313 Hall 4-6-0
R866 B12 4-6-0
R150 B12 4-6-0
R780 08 Shunter 0-6-0
R154 N15 King Arthur 4-6-0
This item can also be used instead of S520 for the Ivatt 2-6-0 R857 R852
Push it on give & make sure the ends rub on the wheels and solder the wire to the motor connection and away your loco will go!
Quantity Each
£1.99
Please select one of the buttons below.
Ring Terminals / Tags M2 / 8BA Great For Hornby / Triang Wiring / Mainline DCC Conversions - Pack Of 20 (PS81)
< Click here for more details >
< Click here for less details >
Peters Spares PS81 Ring Terminals / Tags, M2 / 8BA Great For Hornby / Triang Wiring / Mainline DCC Conversions.
We Also Use These For Converting Mainline Locos By Cutting The Large Loop End Off And Using To Overlap (With Some Insulation of Plasticard) The Mainline Cut Down Brush Holder.
Quantity Each
£4.49
Please select one of the buttons below.
8 Ohm Slim Speaker - Approx 36 x 20 x 4mm (PS112)
< Click here for more details >
< Click here for less details >
Peters Spares PS112 8 Ohm Slim Speaker 35x20x4mm
A Nice Loud Speaker, Similar To The Sugarcube Speaker. Can Be Used As It Is So No Need To Find Space For A Baffle.
If You Trim The Speaker You Must Tape Up Any Holes Created.
One Speaker Can Be Used With A Decoder.
Quantity Each
£4.49
Please select one of the buttons below.
8 Ohm Slim Speaker - Approx 32 x 29 x 5mm (PS113)
< Click here for more details >
< Click here for less details >
Peters Spares PS113 8 Ohm Slim Speaker
A Nice Loud Speaker, Similar To The Sugarcube Speaker. Can Be Used As It Is So No Need To Find Space For A Baffle.
If You Trim The Speaker You Must Tape Up Any Holes Created.
One Speaker Can Be Used With A Decoder.
Quantity Each
£4.75
Please select one of the buttons below.
8 Ohm Speaker - Approx 40 x 20mm (PS114)
Quantity Each
£1.99
Please select one of the buttons below.
Lima Replacement L1-2719-00 Dummy Bogie Retaining Clip (PS122)
Quantity Each
£1.00
Please select one of the buttons below.
Pickup Terminal S3992 (PS147)
Quantity Each
£2.99
Please select one of the buttons below.
Wheel Contact Spring S5871 (PS160)
Quantity Each
£9.60
Please select one of the buttons below.
8 Ohm 2W Speaker - Approx 57.5 x 23 x 15mm (PS166)
< Click here for more details >
< Click here for less details >
Peters Spares PS166 8 Ohm 2W Speaker 57.5 x 23 x 15mm (Excluding Lugs) 84mm Including Lugs
A miniature loudspeaker that has mounting lugs and flying leads.
Impedance: 8Ω
Power: 2W Max 3W
High sound pressure level
Frequency range up to 20kHz
Mounting lugs hole ø5.8mm
Flying lead length 180mm
Molex connector
Weight 28 grams
Quantity Each
£8.50
Please select one of the buttons below.
8 Ohm 0.8W Hornby Tender Round Enclosed Speaker 27mm (PS167)
< Click here for more details >
< Click here for less details >
Peters Spares PS167 8 Ohm 0.8W Round Enclosed Speaker 27mm For Hornby Tenders.
Product Information
Speaker, Miniature, 0.8 W, 8 ohm, 500 Hz to 20 kHz, 90dB ±3dB
Transducer Function: Speaker
Driver Type: Miniature
Power Rating RMS: 800mW
External Diameter - Metric: 27mm
Impedance: 8ohm
External Width - Metric: -
Resonant Frequency: 850Hz
Frequency Response Min: 500Hz
Power Rating Nom: 800mW
Frequency Response Max: 20kHz
Sound Level SPL: 90dB
External Diameter - Imperial: 1.063"
External Width - Imperial: -
Speaker Shape: Round
Power Rating Max: 1W
External Length - Metric: -
Speaker Mounting: Bare Mount
External Depth - Metric: 4.9mm
External Length - Imperial: -
External Depth - Imperial: 0.193"
Quantity Each
£5.50
Please select one of the buttons below.
8 Ohm 1W Sugar Cube Replacement Speaker - Approx 15 x 11mm (PS168)
Quantity Each
£1.99
Please select one of the buttons below.
8 Pin DCC Socket NEM 652 (PS170)