Quantity Each
£5.99
Please select one of the buttons below.
Mainline Replacement Axle Set "Class J72" (PS27)
< Click here for more details >
< Click here for less details >
Peters Spares PS27 Mainline Axle Set - J72 0-6-0 Tank Loco OO Gauge
Diamentions:
Gear: 12.6mm (Offset Not Centre On Axle)
(This Axle set replaces older Round pinned wheels stubs not the more modern Square pinned version. If you have the ridged version the gear wheel is 0.6mm larger. That's only 0.3mm from axle to the top and we have tested them and they work fine. If you have screws through the wheels they will not fit.)
Please note when fitting the parts you need to quarter the wheels on one side at 12 o'clock and the opposite side at 3 o'clock. If this is not done accurately the loco will run poorly or bang when running on the track. We recommend a Markits 'M38 Back-To-Back 'OO' Gauge 14.5mm' to space the wheels correctly. We also recommend degreasing the axles before fitting with 'Ambersil 31588-AA Contact Cleaner FG 400ml (Loco Degreaser)' or similar plastic safe degreaser. An addition of slow setting superglue to the pin of the axle is preferred for extra strength (slow setting to allow you to quarter and test the loco before it sets solid.) We have found upon testing that some locos axles due to production differences or some that have been damaged from previous repairs and from metal fatigue need superglue as an extra helping hand to stay secure. We have also found some locos due to the metal fatigue are just not repairable. Some skill is therefore required to repair these locos and may not be a direct push fit.
These are replacements made by Peters Spares in China
Quantity Each
£5.99
Please select one of the buttons below.
Mainline Replacement Axle Set "03 / Pannier / 66xx" (PS28)
< Click here for more details >
< Click here for less details >
Peters Spares PS28 Mainline Axle Set 03 Shunter 0-6-0 / 66X Tank 0-6-2 / Pannier Tank 0-6-0 (Including The Bachmann Pannier) OO Gauge
Diamentions:
Gear: 9.4mm
(This Axle set replaces older Round pinned wheels stubs not the more modern Square pinned version).
Please note when fitting the parts you need to quarter the wheels on one side at 12 o'clock and the opposite side at 3 o'clock. If this is not done accurately the loco will run poorly or bang when running on the track. We recommend a Markits 'M38 Back-To-Back 'OO' Gauge 14.5mm' to space the wheels correctly. We also recommend degreasing the axles before fitting with 'Ambersil 31588-AA Contact Cleaner FG 400ml (Loco Degreaser)' or similar plastic safe degreaser. An addition of slow setting superglue to the pin of the axle is preferred for extra strength (slow setting to allow you to quarter and test the loco before it sets solid.) We have found upon testing that some locos axles due to production differences or some that have been damaged from previous repairs and from metal fatigue need superglue as an extra helping hand to stay secure. We have also found some locos due to the metal fatigue are just not repairable. Some skill is therefore required to repair these locos and may not be a direct push fit.
These are replacements made by Peters Spares in China
Quantity Each
£5.99
Please select one of the buttons below.
Mainline Replacement Axle Set "Collett / Manor / Mogul / 43xx / Replica B1" (PS29)
< Click here for more details >
< Click here for less details >
Peters Spares PS29 Mainline Axle Set - Collett 0-6-0 / Manor 4-6-0 / Mogul 43xx 2-6-0 & The Replica 4-6-0 B1 OO Gauge
Diamentions:
Gear: 12.5mm
(This Axle set replaces older Round pinned wheels stubs not the more modern Square pinned version)
Please note when fitting the parts you need to quarter the wheels on one side at 12 o'clock and the opposite side at 3 o'clock. If this is not done accurately the loco will run poorly or bang when running on the track. We recommend a Markits 'M38 Back-To-Back 'OO' Gauge 14.5mm' to space the wheels correctly. We also recommend degreasing the axles before fitting with 'Ambersil 31588-AA Contact Cleaner FG 400ml (Loco Degreaser)' or similar plastic safe degreaser. An addition of slow setting superglue to the pin of the axle is preferred for extra strength (slow setting to allow you to quarter and test the loco before it sets solid.) We have found upon testing that some locos axles due to production differences or some that have been damaged from previous repairs and from metal fatigue need superglue as an extra helping hand to stay secure. We have also found some locos due to the metal fatigue are just not repairable. Some skill is therefore required to repair these locos and may not be a direct push fit.
These are replacements made by Peters Spares in China
Quantity Each
£5.99
Please select one of the buttons below.
Bachmann Replacement Axle Set "Jubilee / Scot / 4MT / Manor" (PS30)
< Click here for more details >
< Click here for less details >
Peters Spares PS30 Bachmann Axle Set Jubilee 4-6-0 / Scot 4-6-0 / 4MT 4-6-0 / Manor 4-6-0 OO Gauge
Diamentions:
Gear: 14.5mm
(This Axle set replaces older Round pinned wheels stubs not the more modern Square pinned version)
Please note when fitting the parts you need to quarter the wheels on one side at 12 o'clock and the opposite side at 3 o'clock. If this is not done accurately the loco will run poorly or bang when running on the track. We recommend a Markits 'M38 Back-To-Back 'OO' Gauge 14.5mm' to space the wheels correctly. We also recommend degreasing the axles before fitting with 'Ambersil 31588-AA Contact Cleaner FG 400ml (Loco Degreaser)' or similar plastic safe degreaser. An addition of slow setting superglue to the pin of the axle is preferred for extra strength (slow setting to allow you to quarter and test the loco before it sets solid.) We have found upon testing that some locos axles due to production differences or some that have been damaged from previous repairs and from metal fatigue need superglue as an extra helping hand to stay secure. We have also found some locos due to the metal fatigue are just not repairable. Some skill is therefore required to repair these locos and may not be a direct push fit.
These are replacements made by Peters Spares in China
Quantity Each
£5.99
Please select one of the buttons below.
Bachmann Replacement Axle Set "03 / 04 Shunter J72 & 0-6-0" (PS31)
< Click here for more details >
< Click here for less details >
Peters Spares PS31 Axle Set - Bachmann 03 / 04 Shunter J72 & 0-6-0 OO Gauge
Diamentions:
Gear: 11.5mm (Offset Not Centre On Axle)
(This Axle set replaces older Round pinned wheels stubs not the more modern Square pinned version)
Please note when fitting the parts you need to quarter the wheels on one side at 12 o'clock and the opposite side at 3 o'clock. If this is not done accurately the loco will run poorly or bang when running on the track. We recommend a Markits 'M38 Back-To-Back 'OO' Gauge 14.5mm' to space the wheels correctly. We also recommend degreasing the axles before fitting with 'Ambersil 31588-AA Contact Cleaner FG 400ml (Loco Degreaser)' or similar plastic safe degreaser. An addition of slow setting superglue to the pin of the axle is preferred for extra strength (slow setting to allow you to quarter and test the loco before it sets solid.) We have found upon testing that some locos axles due to production differences or some that have been damaged from previous repairs and from metal fatigue need superglue as an extra helping hand to stay secure. We have also found some locos due to the metal fatigue are just not repairable. Some skill is therefore required to repair these locos and may not be a direct push fit.
These are replacements made by Peters Spares in China
Quantity Each
£3.00
Please select one of the buttons below.
Hornby Replacement Container / Lowmac 10mm Plain Wagon Wheels (PS33)
< Click here for more details >
< Click here for less details >
Peters Spares PS33 Hornby Replacement Metal Container / 100 Ton Tanker / Lomac 10mm Plain
Also Fits R342 Tierwag Car Transporter, Brick Wagon, Track Cleaning Car
Code 75 Track Friendly
Wagon Wheels, insulated on one side so one wheel is live to the axle. With a typical Hornby axle length and the pin point end designed to be similar to the Hornby for ease of fitment.
Standard Type Axle To Fit Most Brands 25.6mm Long / 2mm Wide
OO/HO Gauge
Designed to replace Hornby plastic Container wagon and Lomac wheels. Cambrian Sturgeon kits, and Jouef 1980s era SNCF double decker stock.
We have been told by a customer that these can also be used in the old triang bogie bolster.
These are replacements made by Peters Spares in China
(When fitting if they do not rotate freely please squeeze the axle boxes together slightly).
Quantity Each
£3.00
Please select one of the buttons below.
Lima Replacement 11.5mm Wagon & Coach Wheels (PS34)
< Click here for more details >
< Click here for less details >
Peters Spares PS34 Lima Replacement 11.5mm Wagon & Coach Wheels, OO/HO Gauge
Code 75 Track Friendly
Insulated on one side so live to one wheel to allow electrical pickup from the axle. With Lima's shorter 24.5mm Axle length, 2mm Thick Axle.
Designed to replace Older Lima 'Pizza Cutter' metal or plastic wagon and coach wheels.
Quantity Each
£5.99
Please select one of the buttons below.
Mainline Replacement Axle Set "Patriot / Jubilee / Scot / 4MT" (PS39)
< Click here for more details >
< Click here for less details >
Peters Spares PS39 Mainline Axle Set Patriot 4-6-0 / Jubilee 4-6-0 / Scot 4-6-0 / 4MT 4-6-0 OO Gauge
Diamentions:
Gear: 13.2mm
(This Axle set replaces older Round pinned wheels stubs not the more modern Square pinned version)
Please note when fitting the parts you need to quarter the wheels on one side at 12 o'clock and the opposite side at 3 o'clock. If this is not done accurately the loco will run poorly or bang when running on the track. We recommend a Markits 'M38 Back-To-Back 'OO' Gauge 14.5mm' to space the wheels correctly. We also recommend degreasing the axles before fitting with 'Ambersil 31588-AA Contact Cleaner FG 400ml (Loco Degreaser)' or similar plastic safe degreaser. An addition of slow setting superglue to the pin of the axle is preferred for extra strength (slow setting to allow you to quarter and test the loco before it sets solid.) We have found upon testing that some locos axles due to production differences or some that have been damaged from previous repairs and from metal fatigue need superglue as an extra helping hand to stay secure. We have also found some locos due to the metal fatigue are just not repairable. Some skill is therefore required to repair these locos and may not be a direct push fit.
These are replacements made by Peters Spares in China
Quantity Each
£4.60
Please select one of the buttons below.
Replacement Triang Hornby S5449 Class 35 / 31 / 37 / EM2 Axle / Gear Set (PS75)
< Click here for more details >
< Click here for less details >
Peters Spares PS75 Replacement Triang Hornby S5449 Class 35 / 31 / 37 / EM2 Axle / Gear Set (Pk1)
Please secure the wheels to the axle with a small amount of glue.
(These items have been made in a semi flexible engineers resin so can be flexed to fit or remove the item. Care must be taken to avoid damage. Items are moulded and therefore require some cleaning of mould flash before use with a modelling file or sharp blade. Made For Peter Spares here In The UK)
Quantity Each
£9.00
Please select one of the buttons below.
Lima Replacement Small Wheels (PS76)
< Click here for more details >
< Click here for less details >
Peters Spares PS76 Replacement Lima Small Wheel
Wheel Size Excluding the Flange is 12mm
Suitable for:
HO:
Class 33
OO:
Class 125 HST
Class 50 Hoover
Class 55 Deltic
Class 73
GWR Railcar
DMU 101 117 121 156
Dummy Boige / Dummy Motor Bogie Middle Wheels Are PS78
8 Wheel Diesel Will Need x1 PS76 x1 PS78
12 Wheel Diesel Will Need x1 PS76 x2 PS78
DMU Dummy / Centre Car Wheels are PS34
Code 75 Friendly
When fitting to help with traction we recommend putting to a back to back of 14mm and easing off or replacing the old pickup arrangement, adding weight.
Quantity Each
£9.00
Please select one of the buttons below.
Lima Replacement Large Wheels (PS77)
< Click here for more details >
< Click here for less details >
Peters Spares PS77 Replacement Lima Large Wheel / Gear On Axle
Wheel Size Excluding the Flange is 14.5mm
Suitable For OO:
Class 31
Class 26
Class 27
Class 33
Class 37
Class 42 Warship
Class 47
Class 52 Western
Class 59
Class 60
Class 66
Class 87
Class 92
Dummy Boige / Dummy Motor Bogie Middle Wheels Are PS79
8 Wheel Diesel Will Need x1 PS77 x1 PS79
12 Wheel Diesel Will Need x1 PS77 x2 PS79
Code 75 Friendly
When fitting to help with traction we recommend putting to a back to back of 14mm and easing off or replacing the old pickup arrangement, adding weight.
Quantity Each
£8.00
Please select one of the buttons below.
Lima Replacement Small Wheels (PS78)
< Click here for more details >
< Click here for less details >
Peters Spares PS78 Replacement Lima Small Wheels
Wheel Size Excluding the Flange is 12mm
Suitable for:
HO:
Class 33
OO:
Class 125 HST
Class 50 Hoover
Class 55 Deltic
Class 73
GWR Railcar
DMU 101 117 121 156
Drive / Motor Bogie Wheels Are PS76
8 Wheel Diesel Will Need x1 PS76 x1 PS78
12 Wheel Diesel Will Need x1 PS76 x2 PS78
DMU Dummy / Centre Car Wheels are PS34
Code 75 Friendly
When fitting to help with traction we recommend putting to a back to back of 14mm and easing off or replacing the old pickup arrangement, adding weight.
Quantity Each
£8.00
Please select one of the buttons below.
Lima Replacement Large Wheels (PS79)
< Click here for more details >
< Click here for less details >
Peters Spares PS79 Replacement Lima Large Wheel
Wheel Size Excluding the Flange is 14.5mm
Suitable For OO:
Class 31
Class 26
Class 27
Class 33
Class 37
Class 42 Warship
Class 47
Class 52 Western
Class 59
Class 60
Class 66
Class 87
Class 92
Drive / Motor Bogie Wheels Are PS79
8 Wheel Diesel Will Need x1 PS77 x1 PS79
12 Wheel Diesel Will Need x1 PS77 x2 PS79
Code 75 Friendly
When fitting to help with traction we recommend putting to a back to back of 14mm and easing off or replacing the old pickup arrangement, adding weight.
Quantity Each
£3.00
Please select one of the buttons below.
Replacement Hornby Triang 12.6mm 3 Hole Disc Wagon & Coach Wheels (PS82)
< Click here for more details >
< Click here for less details >
Peters Spares PS82 12.6mm 3 Hole Disc Wagon & Coach Wheels - One Wheel Live To Axle.
(These wheels can be fitted as an ungrade to Triang Hornby Class 35 Hymek / Class 31 / Class 37 Dummy Bogies To Upgrade The Pickup Wheels. They Won't Fit Early Models With Blunt Axles)
Standard Type Axle To Fit Most Brands 25.6mm Long / 2mm Wide
Live Axle One Side To Enable Pickups For Lighting
OO/HO Gauge
Made For Peters Spares In China.
Quantity Each
£3.00
Please select one of the buttons below.
Replacement 12.6mm 8 Spoked Wagon Wheels (PS83)
Quantity Each
£3.00
Please select one of the buttons below.
Replacement 14.1mm Disc Coach Wheels (PS84)
Quantity Each
£3.80
Please select one of the buttons below.
Replacement 12.6MM Solid Disc Wagon & Coach Wheels (PS108)
Quantity Each
£3.00
Please select one of the buttons below.
Lima Replacement 11.5mm 3 Hole Wheels (PS115)
< Click here for more details >
< Click here for less details >
Peters Spares PS115 Lima 3 Hole 11.5mm Wheels - One Wheel Live To Axle
OO/HO Gauge
Code 75 Track Friendly
Gunmetal Blackening and insulated on both sides. With Lima's shorter 24.5mm Axle length.2mm Thick Axle.
Designed to replace Older Lima 'Pizza Cutter' metal or plastic wagon and coach wheels. (Old metal wheel shown as an example on the left.)
These are replacements made by Peters Spares in China.
Quantity Each
£3.00
Please select one of the buttons below.
Lima Replacement 11.5mm 8 Spoked Wheels (PS116)
< Click here for more details >
< Click here for less details >
Peters Spares PS116 Lima 8 Spoked 11.5mm Wheel (x1 Pair) - One Wheel Live To Axle (x1 Pair, this is four wheels on to axles.)
OO/HO Gauge
Code 75 Track Friendly
Gunmetal Blackening and insulated on both sides. (x1 Pair enough for a two axle wagon or a coach bogie, this is four wheels on to axles.) With Lima's shorter 24.5mm Axle length.2mm Thick Axle.
Brass Wheel With Gun Black Finish
Designed to replace Older Lima 'Pizza Cutter' metal or plastic wagon and coach wheels. (Old metal wheel shown as an example on the left.)
These are replacements made by Peters Spares in China.
(When fitting if they do not rotate freely please squeeze the axle boxes together slightly).
Quantity Each
£9.99
Please select one of the buttons below.
Bachmann Replacement Axle Set (PS117)
Quantity Each
£9.99
Please select one of the buttons below.
Bachmann Replacement Axle Set "Class J72" (PS118)
Quantity Each
£3.50
Please select one of the buttons below.
12mm 3 Hole Wheels (PS161)
< Click here for more details >
< Click here for less details >
Peters Spares PS161 3 Hole 12mm Wheel (Pk2) Ideal For Kit Built Wagons - One Wheel Live To Axle (x1 Pair, this is four wheels on to axles.)
Brass Wheel With Gun Black Finish
Standard Type Axle To Fit Most Brands 25.6mm Long / 2mm Wide
Live Axle One Side To Enable Pickups For Lighting / Power Using: DCF-PS2.0
OO/HO Gauge
Made For Peters Spares In China.