Quantity Each £1.45
Please select one of the buttons below.
21 Pin Decoder Blanking Plate (36-058) Could Differ In Design From One Shown In Photo
Quantity Each £76.49 £89.95 approx 15% off
Please select one of the buttons below.
E-Z Command "Command Control Centre" (36-500)
Quantity Each £239.99 £299.95 approx 20% off
Please select one of the buttons below.
E-Z Command "Dynamis Ultima DCC System" (36-504)
Quantity Each £18.95
Please select one of the buttons below.
90° 6 Pin Decoder With Back EMF "DC Compatible" (36-556RA)
Quantity Each £50.99 £56.85 approx 10% off
Please select one of the buttons below.
90° 6 Pin Decoder With Back EMF "DC Compatible" - Pack Of 3 (36-556RA)
Quantity Each £90.99 £113.70 approx 20% off
Please select one of the buttons below.
90° 6 Pin Decoder With Back EMF "DC Compatible" - Pack Of 6 (36-556RA)
Quantity Each £39.95
Please select one of the buttons below.
1.5 Amp 10 Function Decoder With With Brake Button Function (36-557A)
< Click here for more details >
< Click here for less details >
A 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket (do not use with the Bachmann Branchline Class 90 – use 36-569A
This decoder replaces item No. 36-557 and can be used in any model for which item No. 36-557 is recommended
Highlights include:
Dual-mode DCC/DC decoder with Back EMF function
10 powered function outputs (+8 logic level outputs and 2 logic level/SUSI outputs)
1.5A continuous load
RailComPlus® for automatic registration when used with selected DCC systems
Suitable for models equipped with DC motors (including coreless motors)
Brake Button function for realistic control of braking (operates on F2)
Operating Modes
NMRA/DCC with 14, 28 and 128 speed steps
Short and Long addresses
DCC and DC operation (DC operation is de-selectable)
Automatic recognition of operational mode and DCC speed step selection
Supports Lenz® LG 100 braking sections
Supports ABC braking sections
Motor Control Features
Suitable for models equipped with DC motors (including coreless motors)
1.5A continuous load
Motor regulation with pulse width frequency from 10kHz to 50kHz
Motor output overload protection; Back EMF (de-selectable)
Function Outputs
10 powered function outputs with overload protection (4 via 21MTC pins, 6 via solder pads)
10 logic level outputs (8 via 21MTC pins, 2 via solder pads)
250mA load per output
500mA total load of all function outputs
2 additional logic outputs
Shunting speed and momentum key selectable
Brake Button function for realistic control of braking (operates on F2)
Dimensions
21.4mm x 15.5mm x 4.5mm
Default Address
Address 3
Programming
DCC Service Mode & DCC PoM (Programming on Main)
Additional Features
RailCom® Feedback system
RailComPlus® automatic Registration
This decoder is manufactured on behalf of Bachmann Europe by ESU. For full technical specifications and instructions, please refer to the ESU user guide for Lokpilot 5 DCC 59629 at https://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/
Quantity Each £107.99 £119.85 approx 10% off
Please select one of the buttons below.
1.5 Amp 10 Function Decoder With With Brake Button Function - Pack Of 3 (36-557A)
< Click here for more details >
< Click here for less details >
A 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket (do not use with the Bachmann Branchline Class 90 – use 36-569A
This decoder replaces item No. 36-557 and can be used in any model for which item No. 36-557 is recommended
Highlights include:
Dual-mode DCC/DC decoder with Back EMF function
10 powered function outputs (+8 logic level outputs and 2 logic level/SUSI outputs)
1.5A continuous load
RailComPlus® for automatic registration when used with selected DCC systems
Suitable for models equipped with DC motors (including coreless motors)
Brake Button function for realistic control of braking (operates on F2)
Operating Modes
NMRA/DCC with 14, 28 and 128 speed steps
Short and Long addresses
DCC and DC operation (DC operation is de-selectable)
Automatic recognition of operational mode and DCC speed step selection
Supports Lenz® LG 100 braking sections
Supports ABC braking sections
Motor Control Features
Suitable for models equipped with DC motors (including coreless motors)
1.5A continuous load
Motor regulation with pulse width frequency from 10kHz to 50kHz
Motor output overload protection; Back EMF (de-selectable)
Function Outputs
10 powered function outputs with overload protection (4 via 21MTC pins, 6 via solder pads)
10 logic level outputs (8 via 21MTC pins, 2 via solder pads)
250mA load per output
500mA total load of all function outputs
2 additional logic outputs
Shunting speed and momentum key selectable
Brake Button function for realistic control of braking (operates on F2)
Dimensions
21.4mm x 15.5mm x 4.5mm
Default Address
Address 3
Programming
DCC Service Mode & DCC PoM (Programming on Main)
Additional Features
RailCom® Feedback system
RailComPlus® automatic Registration
This decoder is manufactured on behalf of Bachmann Europe by ESU. For full technical specifications and instructions, please refer to the ESU user guide for Lokpilot 5 DCC 59629 at https://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/
Quantity Each £191.99 £239.70 approx 20% off
Please select one of the buttons below.
1.5 Amp 10 Function Decoder With With Brake Button Function - Pack Of 6 (36-557A)
< Click here for more details >
< Click here for less details >
A 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket (do not use with the Bachmann Branchline Class 90 – use 36-569A
This decoder replaces item No. 36-557 and can be used in any model for which item No. 36-557 is recommended
Highlights include:
Dual-mode DCC/DC decoder with Back EMF function
10 powered function outputs (+8 logic level outputs and 2 logic level/SUSI outputs)
1.5A continuous load
RailComPlus® for automatic registration when used with selected DCC systems
Suitable for models equipped with DC motors (including coreless motors)
Brake Button function for realistic control of braking (operates on F2)
Operating Modes
NMRA/DCC with 14, 28 and 128 speed steps
Short and Long addresses
DCC and DC operation (DC operation is de-selectable)
Automatic recognition of operational mode and DCC speed step selection
Supports Lenz® LG 100 braking sections
Supports ABC braking sections
Motor Control Features
Suitable for models equipped with DC motors (including coreless motors)
1.5A continuous load
Motor regulation with pulse width frequency from 10kHz to 50kHz
Motor output overload protection; Back EMF (de-selectable)
Function Outputs
10 powered function outputs with overload protection (4 via 21MTC pins, 6 via solder pads)
10 logic level outputs (8 via 21MTC pins, 2 via solder pads)
250mA load per output
500mA total load of all function outputs
2 additional logic outputs
Shunting speed and momentum key selectable
Brake Button function for realistic control of braking (operates on F2)
Dimensions
21.4mm x 15.5mm x 4.5mm
Default Address
Address 3
Programming
DCC Service Mode & DCC PoM (Programming on Main)
Additional Features
RailCom® Feedback system
RailComPlus® automatic Registration
This decoder is manufactured on behalf of Bachmann Europe by ESU. For full technical specifications and instructions, please refer to the ESU user guide for Lokpilot 5 DCC 59629 at https://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/
Quantity Each £6.95
Please select one of the buttons below.
8 Pin to 21 Pin Adapter (36-559)
Quantity Each £42.49 £49.95 approx 15% off
Please select one of the buttons below.
E-Z Command Dynamis "Points Decoder" (36-561)
Quantity Each £5.95
Please select one of the buttons below.
1 x 6 Pin Decoder Socket With Harness (36-562)
Quantity Each £14.49 £15.95 approx 10% off
Please select one of the buttons below.
3 x 6 Pin Decoder Sockets With Harnesses (36-562)
Quantity Each £4.45
Please select one of the buttons below.
1 x 6 Pin Decoder Socket With 8 Pin Plug (36-563)
Quantity Each £16.99 £18.95 approx 10% off
Please select one of the buttons below.
3 x 6 Pin Decoder Sockets With 8 Pin Plugs (36-563)
Quantity Each £7.99 £8.95 approx 10% off
Please select one of the buttons below.
1 x 8 Pin Decoder Socket With Harness (36-564)
Quantity Each £27.95
Please select one of the buttons below.
0.9 Amp 4 Function Decoder Featuring RailComPlus (36-566)
Quantity Each £75.49 £83.85 approx 10% off
Please select one of the buttons below.
0.9 Amp 4 Function Decoder Featuring RailComPlus - Pack Of 3 (36-566)
Quantity Each £133.99 £167.70 approx 20% off
Please select one of the buttons below.
0.9 Amp 4 Function Decoder Featuring RailComPlus - Pack Of 6 (36-566)
Quantity Each £46.95
Please select one of the buttons below.
Next18 Loco Decoder With Brake Button Function (36-567B)
Quantity Each £126.99 £140.85 approx 10% off
Please select one of the buttons below.
Next18 Loco Decoder With Brake Button Function - Pack Of 3 (36-567B)
Quantity Each £225.49 £281.70 approx 20% off
Please select one of the buttons below.
Next18 Loco Decoder With Brake Button Function - Pack Of 6 (36-567B)
Quantity Each £38.95
Please select one of the buttons below.
Zimo 6 Wire DCC Loco-Decoder With Back EMF Featuring Railcom® (36-568W)
Quantity Each £32.95
Please select one of the buttons below.
Zimo 6 Pin DCC Loco-Decoder With Brake Button Function Featuring Railcom® (36-568A)
< Click here for more details >
< Click here for less details >
A 6 Pin (NEM651) DCC Decoder suitable for models fitted with a 6 Pin DCC decoder socket (do not use with the Graham Farish 3F ‘Jinty’ and Class 64XX Pannier Tank – use 36-556RA with these models).
Highlights include:
Multi-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin)) with Back EMF function
4 powered function outputs (+2 logic level/SUSI outputs)
0.8A continuous load
Suitable for models equipped with DC motors (including coreless motors)
Brake Button function for realistic control of braking (operates on F2)
Operating Modes
Multi-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin)) with Back EMF function
14, 28 and 128 speed steps
Short and Long addresses
Motor Control Features
Suitable for models equipped with DC motors (including coreless motors)
0.8A continuous load
Variable pulse width frequency motor regulation (up to 40kHz)
Motor output overload protection; Back EMF (de-selectable)
Function Outputs
4 powered-function outputs with overload protection (2 outputs connect via solder pads)
500mA load per output
500mA total load of all function outputs
2 additional logic level or SUSI outputs
Shunting speed and momentum key selectable
Dimensions
14mm x 9mm x 2.5mm
Default Address
Address 3
Programming
DCC Service Mode & DCC PoM (Programming on Main)
Additional Features
RailCom® Feedback system
Upgradable firmware
Quantity Each £88.99 £98.85 approx 10% off
Please select one of the buttons below.
Zimo 6 Pin DCC Loco-Decoder With Brake Button Function Featuring Railcom® - Pack Of 3 (36-568A)
< Click here for more details >
< Click here for less details >
A 6 Pin (NEM651) DCC Decoder suitable for models fitted with a 6 Pin DCC decoder socket (do not use with the Graham Farish 3F ‘Jinty’ and Class 64XX Pannier Tank – use 36-556RA with these models).
Highlights include:
Multi-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin)) with Back EMF function
4 powered function outputs (+2 logic level/SUSI outputs)
0.8A continuous load
Suitable for models equipped with DC motors (including coreless motors)
Brake Button function for realistic control of braking (operates on F2)
Operating Modes
Multi-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin)) with Back EMF function
14, 28 and 128 speed steps
Short and Long addresses
Motor Control Features
Suitable for models equipped with DC motors (including coreless motors)
0.8A continuous load
Variable pulse width frequency motor regulation (up to 40kHz)
Motor output overload protection; Back EMF (de-selectable)
Function Outputs
4 powered-function outputs with overload protection (2 outputs connect via solder pads)
500mA load per output
500mA total load of all function outputs
2 additional logic level or SUSI outputs
Shunting speed and momentum key selectable
Dimensions
14mm x 9mm x 2.5mm
Default Address
Address 3
Programming
DCC Service Mode & DCC PoM (Programming on Main)
Additional Features
RailCom® Feedback system
Upgradable firmware
Quantity Each £36.95
Please select one of the buttons below.
Plux22 Loco Decoder "Brake Button Enabled" (36-570)
Quantity Each £99.99 £110.85 approx 10% off
Please select one of the buttons below.
Plux22 Loco Decoder "Brake Button Enabled" - Pack Of 3 (36-570)
Quantity Each £177.49 £221.70 approx 20% off
Please select one of the buttons below.
Plux22 Loco Decoder "Brake Button Enabled" - Pack Of 6 (36-570)
Check order
