Quantity Each
£2.99
Please select one of the buttons below.
Mainline / Bachmann Pod Motor Carbon Brush & Spring Pack (PS3)
< Click here for more details >
< Click here for less details >
Peters Spares PS3 Mainline / Replica / Dapol & Early Bachmann, Pod Motor Carbon Brush & Spring Pack (Two Brushes & Two Springs Enough For One Loco) For Loco Drive Steam Locos And Diesel Drive Units. The Carbon Brush is 2.2mm long 2.8mm wide. OO Gauge (These Items Are Replacements Made By Peter Spares In China With The Permission Of Bachmann)
This Item Fits:
03 Diesel Shunter
4300 Class 2-6-0 Mogul
Manor 4-6-0
Jubilee 4-6-0
Scot 4-6-0
Pannier 0-6-0
Class 45 Diesel
J72 0-6-0
Collett Goods 0-6-0
Warship Diesel
Patriot 4-6-0
4MT 4-6-0
Class 6600 0-6-2 Tank.
(This item will not fit Bachmann open or closed can motors or the Mainline / Dapol / Hornby Class 56)
Quantity Each
£4.99
Please select one of the buttons below.
Replacement Mainline / Bachmann Brush Springs x 10 (PS6)
Quantity Each
£5.99
Please select one of the buttons below.
Mainline Replacement Axle Set "Class J72" (PS27)
< Click here for more details >
< Click here for less details >
Peters Spares PS27 Mainline Axle Set - J72 0-6-0 Tank Loco OO Gauge
Diamentions:
Gear: 12.6mm (Offset Not Centre On Axle)
(This Axle set replaces older Round pinned wheels stubs not the more modern Square pinned version. If you have the ridged version the gear wheel is 0.6mm larger. That's only 0.3mm from axle to the top and we have tested them and they work fine. If you have screws through the wheels they will not fit.)
Please note when fitting the parts you need to quarter the wheels on one side at 12 o'clock and the opposite side at 3 o'clock. If this is not done accurately the loco will run poorly or bang when running on the track. We recommend a Markits 'M38 Back-To-Back 'OO' Gauge 14.5mm' to space the wheels correctly. We also recommend degreasing the axles before fitting with 'Ambersil 31588-AA Contact Cleaner FG 400ml (Loco Degreaser)' or similar plastic safe degreaser. An addition of slow setting superglue to the pin of the axle is preferred for extra strength (slow setting to allow you to quarter and test the loco before it sets solid.) We have found upon testing that some locos axles due to production differences or some that have been damaged from previous repairs and from metal fatigue need superglue as an extra helping hand to stay secure. We have also found some locos due to the metal fatigue are just not repairable. Some skill is therefore required to repair these locos and may not be a direct push fit.
These are replacements made by Peters Spares in China
Quantity Each
£5.99
Please select one of the buttons below.
Mainline Replacement Axle Set "03 / Pannier / 66xx" (PS28)
< Click here for more details >
< Click here for less details >
Peters Spares PS28 Mainline Axle Set 03 Shunter 0-6-0 / 66X Tank 0-6-2 / Pannier Tank 0-6-0 (Including The Bachmann Pannier) OO Gauge
Diamentions:
Gear: 9.4mm
(This Axle set replaces older Round pinned wheels stubs not the more modern Square pinned version).
Please note when fitting the parts you need to quarter the wheels on one side at 12 o'clock and the opposite side at 3 o'clock. If this is not done accurately the loco will run poorly or bang when running on the track. We recommend a Markits 'M38 Back-To-Back 'OO' Gauge 14.5mm' to space the wheels correctly. We also recommend degreasing the axles before fitting with 'Ambersil 31588-AA Contact Cleaner FG 400ml (Loco Degreaser)' or similar plastic safe degreaser. An addition of slow setting superglue to the pin of the axle is preferred for extra strength (slow setting to allow you to quarter and test the loco before it sets solid.) We have found upon testing that some locos axles due to production differences or some that have been damaged from previous repairs and from metal fatigue need superglue as an extra helping hand to stay secure. We have also found some locos due to the metal fatigue are just not repairable. Some skill is therefore required to repair these locos and may not be a direct push fit.
These are replacements made by Peters Spares in China
Quantity Each
£5.99
Please select one of the buttons below.
Mainline Replacement Axle Set "Collett / Manor / Mogul / 43xx / Replica B1" (PS29)
< Click here for more details >
< Click here for less details >
Peters Spares PS29 Mainline Axle Set - Collett 0-6-0 / Manor 4-6-0 / Mogul 43xx 2-6-0 & The Replica 4-6-0 B1 OO Gauge
Diamentions:
Gear: 12.5mm
(This Axle set replaces older Round pinned wheels stubs not the more modern Square pinned version)
Please note when fitting the parts you need to quarter the wheels on one side at 12 o'clock and the opposite side at 3 o'clock. If this is not done accurately the loco will run poorly or bang when running on the track. We recommend a Markits 'M38 Back-To-Back 'OO' Gauge 14.5mm' to space the wheels correctly. We also recommend degreasing the axles before fitting with 'Ambersil 31588-AA Contact Cleaner FG 400ml (Loco Degreaser)' or similar plastic safe degreaser. An addition of slow setting superglue to the pin of the axle is preferred for extra strength (slow setting to allow you to quarter and test the loco before it sets solid.) We have found upon testing that some locos axles due to production differences or some that have been damaged from previous repairs and from metal fatigue need superglue as an extra helping hand to stay secure. We have also found some locos due to the metal fatigue are just not repairable. Some skill is therefore required to repair these locos and may not be a direct push fit.
These are replacements made by Peters Spares in China
Quantity Each
£5.99
Please select one of the buttons below.
Mainline Replacement Axle Set "Patriot / Jubilee / Scot / 4MT" (PS39)
< Click here for more details >
< Click here for less details >
Peters Spares PS39 Mainline Axle Set Patriot 4-6-0 / Jubilee 4-6-0 / Scot 4-6-0 / 4MT 4-6-0 OO Gauge
Diamentions:
Gear: 13.2mm
(This Axle set replaces older Round pinned wheels stubs not the more modern Square pinned version)
Please note when fitting the parts you need to quarter the wheels on one side at 12 o'clock and the opposite side at 3 o'clock. If this is not done accurately the loco will run poorly or bang when running on the track. We recommend a Markits 'M38 Back-To-Back 'OO' Gauge 14.5mm' to space the wheels correctly. We also recommend degreasing the axles before fitting with 'Ambersil 31588-AA Contact Cleaner FG 400ml (Loco Degreaser)' or similar plastic safe degreaser. An addition of slow setting superglue to the pin of the axle is preferred for extra strength (slow setting to allow you to quarter and test the loco before it sets solid.) We have found upon testing that some locos axles due to production differences or some that have been damaged from previous repairs and from metal fatigue need superglue as an extra helping hand to stay secure. We have also found some locos due to the metal fatigue are just not repairable. Some skill is therefore required to repair these locos and may not be a direct push fit.
These are replacements made by Peters Spares in China
Quantity Each
£3.99
Please select one of the buttons below.
Replacement Metal Mainline Small Round Buffers - Pack Of 4 (PS49)
< Click here for more details >
< Click here for less details >
Peters Spares PS49 Replacement Mainline Small Round Buffers (Pk4) Blackened Metal
OO Gauge
These are replacements made by Peter Spares in the UK.
(Items will need to be removed from the metal mould sprue, this can be done with a good pair of snips or fine modelling saw or even a electric mini drill with slitting / cutting disc. The items can then be glued into place using superglue. You may see a small mout of green on the item, this is oxidisation of the bronze and will wipe off. This can be stopped by spraying or painting with a varnish.)
Quantity Each
£4.50
Please select one of the buttons below.
Replacement Metal Mainline Large Round Buffers - Pack Of 4 (PS51)
< Click here for more details >
< Click here for less details >
Peters Spares PS51 Replacement Mainline Large Round Buffers (Pk4) Blackened Metal, These Measure 5.8mm in Diameter
OO Gauge
These are replacements made by Peter Spares in the UK.
(Items will need to be removed from the metal mould sprue, this can be done with a good pair of snips or fine modelling saw or even a electric mini drill with slitting / cutting disc. The items can then be glued into place using superglue. You may see a small mout of green on the item, this is oxidisation of the bronze and will wipe off. This can be stopped by spraying or painting with a varnish.)
Quantity Each
£4.50
Please select one of the buttons below.
Replacement Metal Mainline "Class 42" Warship Buffers - Pack Of 4 (PS52)
< Click here for more details >
< Click here for less details >
Peters Spares PS52 Replacement Mainline Class 42 Warship Buffers (Pk4) Blackened Metal
OO Gauge
These are replacements made by Peters Spares in the UK.
(Items will need to be removed from the metal mould sprue, this can be done with a good pair of snips or fine modelling saw or even a electric mini drill with slitting / cutting disc. The items can then be glued into place using superglue. You may see a small mout of green on the item, this is oxidisation of the bronze and will wipe off. This can be stopped by spraying or painting with a varnish.)
Quantity Each
£3.99
Please select one of the buttons below.
Replacement Metal Mainline "Class 03" Shanked Oval Buffers - Pack Of 4 (PS55)
< Click here for more details >
< Click here for less details >
Peters Spares PS55 Replacement Mainline 03 Shunter Shanked Oval Buffers (Pk4) Blackened Metal
OO Gauge
These are replacements made by Peter Spares in the UK.
(Items will need to be removed from the metal mould sprue, this can be done with a good pair of snips or fine modelling saw or even a electric mini drill with slitting / cutting disc. The items can then be glued into place using superglue. You may see a small mout of green on the item, this is oxidisation of the bronze and will wipe off. This can be stopped by spraying or painting with a varnish.)
Quantity Each
£4.50
Please select one of the buttons below.
Replacement Metal Mainline Round Shanked Buffers - Pack Of 4 (PS56)
< Click here for more details >
< Click here for less details >
Peters Spares PS56 Replacement Mainline Round Shanked Buffers (Pk4) Blackened Metal
OO Gauge
These are replacements made by Peter Spares in the UK.
(Items will need to be removed from the metal mould sprue, this can be done with a good pair of snips or fine modelling saw or even a electric mini drill with slitting / cutting disc. The items can then be glued into place using superglue. You may see a small mout of green on the item, this is oxidisation of the bronze and will wipe off. This can be stopped by spraying or painting with a varnish.)
Quantity Each
£1.99
Please select one of the buttons below.
Ring Terminals / Tags M2 / 8BA Great For Hornby / Triang Wiring / Mainline DCC Conversions - Pack Of 20 (PS81)
< Click here for more details >
< Click here for less details >
Peters Spares PS81 Ring Terminals / Tags, M2 / 8BA Great For Hornby / Triang Wiring / Mainline DCC Conversions.
We Also Use These For Converting Mainline Locos By Cutting The Large Loop End Off And Using To Overlap (With Some Insulation of Plasticard) The Mainline Cut Down Brush Holder.
Quantity Each
£0.99
Please select one of the buttons below.
Motor Brush Spring Retainer x 1 (G1173)
Quantity Each
£0.99
Please select one of the buttons below.
Motor Brush Holder x 1 (G1173)
Quantity Each
£9.99
Please select one of the buttons below.
Coupling Rods With Crank Pins (G1174)
Quantity Each
£4.99
Please select one of the buttons below.
Motor Brush Plate With Bearing (G1188)
Quantity Each
£4.99
Please select one of the buttons below.
Motor Brush Plate With Bearing "4-6-0 Standard Class 4"